Ergomotion Rio 3.0 Manuel De L'utilisateur page 13

Connecting strap (optional)
If a split setup is being installed, optional plastic connecting straps can be used to help secure the bases
together. To purchase optional accessories, please call 1-888-550-3746.
STEP 1
With the bases in their desired location,
slightly loosen both legs to allow the strap
to fit on the leg bolt, between the leg
washer and frame.
STEP 2
Slide side (a) of the connecting strap onto leg bolt. Swing the strap and connect
side (b) to the leg bolt. Secure the strap by shifting to the left.
a
STEP 3
Re-tighten legs. Do not over tighten. Use the remaining strap and repeat on
other end of the base.
b
11