ARDES AR4C06 Mode D'emploi page 19

Instructions for use
GB
SUPPORT ASSEMBLY
Turn the appliance over, rest the plastic supports in place matching
the holes with those on the appliance. Then fix the supports with the 2
screws provided.
Before connecting or disconnecting the appliance, make sure that the
function switch (3) is in the OFF position.
To turn the appliance on, insert the plug in the power outlet, set the
function switch (3) in the desired position and turn the temperature switch
(2) clockwise to the maximum position.
Once the desired room temperature is reached, turn the handle slowly, in
a counter clockwise direction, until the appliance is turned off.
At this point, the product will automatically restart when the temperature
in the room goes below the set limit.
Before replacing the appliance in its package, make sure it has cooled
sufficiently.
Maintenance
GB
This appliance does not require any special maintenance.
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the apparatus and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
19