Connecting The Controller To Your Computer - Numark NuVJ Manuel De Référence

CONNECTING THE CONTROLLER TO YOUR COMPUTER

To connect the NuVJ to your computer, please connect the supplied USB power cord from the USB
port on the NuVJ to an an available USB port on your computer. There is no need to plug in an
adapter – your computer's USB bus will power the controller – but if you would like to use external
power, you may do so by plugging in a 6V-1A DC adapter.
The NuVJ is a Plug and Play device so there are no drivers or special software to install. When you
plug in the controller, you will see the screen illuminate and display "NuVJ".
Please note: When using the NuVJ control surface with other software, some of the
features of the control surface will be disabled. These features include the LED lights,
as well as the value readout on the display. The display will simply say "NuVJ".
7