Declaration Of Conformity - SystemAir K100 M Notice De Montage Et D'installation

GB IE

Declaration of Conformity

Manufacturer
Systemair AB
Industrivägen 3
SE-73930 Skinnskatteberg SWEDEN
Office: +46 222 440 00 Fax: +46 222 440 99
www.systemair.com
hereby confirms that the following products:
Duct fans with circular connection:
Insulated duct fans with circular connection:
Wall mounted fans with circular connection:
Duct fans with rectangular connection:
Roof fans with circular or square connection:
Kitchen fans:
Radial fans:
(The declaration applies only to product in the condition it was delivered in and installed in the facility in
accordance with the included installation instructions. The insurance does not cover components that are added
or actions carried out subsequently on the product)
Comply with all applicable requirements in the following directives
 Machinery Directive 2006/42/EC
 Low Voltage Directive 2006/95/EC
 EMC Directive 2004/108/EC
The following harmonized standards are applied in applicable parts:
EN ISO 12100-1 Safety of machinery – Basic concepts, general principles for design – Part 1: Basic
terminology, methodology
EN ISO 12100-2 Safety of machinery – Basic concepts, general principles for design – Part 2: Technical
principles
EN 14121-1:2007 Safety of machinery – Risk assessment – Part 1: Principles
EN 13857 Safety of machinery – Safety distances to prevent hazard zones being reached by upper or
lower limbs
EN 60 335-1 Household and similar electrical appliances – Safety Part 1: General requirements
EN 60 335-2-80 Household and similar electrical appliances – Safety – Part 2-80: Particular requirements
for fans
EN 50 366-1 Household and similar electrical appliances – Electromagnetic fields – Methods for
evaluations and measurement
EN 50 106:2007 Safety of household and similar appliances – Particular rules for routine tests referring to
appliances under the scope of EN 60 335-1 and EN 60967
EN 60 034-5 Rotating electrical machines – Part 5: Degrees of protection provided by the integral design
of rotating electrical machines (IP code)
EN 60 204-1 Safety of machinery – Electrical equipment of machines – Part 1: General requirements
EN 61000-6-2 Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity for industrial
environments
EN 61000-6-3 Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission
standards for residential, commercial and light-industrial environments
Skinnskattberg 30-12-2011
Mats Sándor
Technical Director
202341 (11-07-2012)
K100 – K315L, KD200 L1 – KD500 M3, KVO100 – KVO400
KVKE125 – KVKE315L, KVK125 – KVK 500,
KVK125DUO – KVK500DUO
KV100M – KV315L, RVF100M, RVF100XL
KE/KT40-20-4 – KE/KT100-50-8, RS/RSI30-15L – RS/RSI100-
50L3, KDRE/KDRD45 – KDRE/KDRD70
TFSR/TFSK125M - TFSR/TFSK315L, TFE220S/M,
TOE/TOV355-4 - TOE/TOV560-4
Essvent S/L, KFB140S/L
CE140S-125 – CE140L-160, CE/CT200-4 – CE/CT450-6,
CKS355-1 – CKS560-3
5 Original