Télécharger Imprimer la page

ATI BQ20 Serie Manuel D'utilisation page 5

Publicité

5.
DESCRIZIONE COSTRUTTIVA E FUNZIONAMENTO
CONSTRUCTION AND OPERATION DESCRIPTION
DESCRIPCIÓN DE LA CONSTRUCCIÓN Y FUNCIONAMIENTO
DESCRIPTION DE LA CONSTRUCTION ET DU FONCTIONNEMENT
Lo scopo di questo apparecchio è di riscaldare l'acqua calda
sanitaria in due modi diversi:
A.
attraverso
lo
raffreddamento del motore e l'acqua immagazzinata nel
serbatoio. Tale scambio termico è possibile grazie ad
uno scambiatore di calore. L'acqua di raffreddamento del
motore circola attraverso uno scambiatore di calore
posto
al
centro
uniformemente il calore.
B.
per mezzo di una resistenza elettrica (fornita di serie con
l'apparecchio).
El propósito de este aparato es calentar el agua caliente
sanitaria de dos formas diferentes:
A.
mediante el intercambio de calor entre el agua de
refrigeración del motor y el agua almacenada en el
depósito. Este intercambio de calor es posible gracias a
un intercambiador de calor. El agua de refrigeración del
motor circula a través de un intercambiador de calor
ubicado en el centro del tanque para distribuir el calor de
manera uniforme.
B.
mediante resistencia eléctrica (suministrada de serie con
el aparato).
scambio
di
calore
tra
l'acqua
del
serbatoio
per
diffondere
The purpose of this appliance is to heat the domestic water in
two different ways:
di
A.
through the heat exchange between the engine cooling
water and the water stored in the tank. This heat
exchange is possible thanks to a heat exchanger. The
engine cooling water circulates through one heat
exchanger located in the centre of the tank to spread the
heat evenly.
B.
by means of an electric heating element (supplied as
standard with the appliance).
Le but de cet appareil est de chauffer l'eau sanitaire de deux
manières différentes:
A.
par l'échange de chaleur entre l'eau de refroidissement
du moteur et l'eau stockée dans le réservoir. Cet
échange thermique est possible grâce à un échangeur
de chaleur. L'eau de refroidissement du moteur circule à
travers un échangeur de chaleur situé au centre du
réservoir pour répartir uniformément la chaleur.
B.
au moyen d'une résistance électrique (fournie en
standard avec l'appareil).
5 / 16

Publicité

loading