Publicité
Les langues disponibles
Les langues disponibles
EN
INSTALLATION
The product is intended for installation in
a wall or ceiling, for connection to round
ventilation ducts.
1.
Switch off the power supply.
FIG. 1
FIG. 2
2.
Remove the front cover from the product.
FIG. 3
3.
Mark out and drill the mounting holes.
FIG. 4
FIG. 5
4.
Fasten the product with screws.
FIG. 6
5.
Connect the wires to the terminal block.
FIG. 7
6.
Connect the power supply.
DESIGNATIONS IN WIRING
DIAGRAM
L
Live wire
N
Neutral wire
QF
Automatic fuse
S
External power switch
16
MAINTENANCE
1.
Switch off the power supply.
FIG. 8
2.
Remove the front cover.
FIG. 9
3.
Clean the product with a cloth moistened
with water and a mild detergent.
FIG. 10
4.
Clean the fan blades with a paintbrush.
FIG. 11
5.
Rinse the front grille under running water.
Wipe the surface dry.
FIG. 12
6.
Fit the front grille.
FIG. 13
7.
Connect the power supply.
NOTE:
•
Make sure no water gets into the
electrical components.
•
Maintenance should be carried out at
least once every 6 months.
Publicité
