GE AEH06 Serie Manuel D'utilisation Et Instructions D'installation page 6

About the controls on the air conditioner—models with control knobs.
Features and appearance will vary.
MODE CONTROL
Controls
Mode Control
High Cool, Med Cool and Low Cool
provide cooling with different fan speeds .
Fan settings provide air circulation and filtering
without cooling .
NOTE: If you move the mode control from a cool
setting to OFF or to a fan setting, wait at least
3 minutes before switching back to a cool setting.
Cooling Descriptions
For Normal Cooling—Select High Cool or Med
Cool with the TEMPERATURE control at midpoint .
For Maximum Cooling—Select High Cool with
the TEMPERATURE control at the highest number
available on your knob .
For Quieter and Nighttime Cooling—Select Low
Cool with the TEMPERATURE control at midpoint .
Controls
6
(on some models)
(on some models)
TEMPERATURE CONTROL
TEMP Control
The TEMP control is used to maintain the room
temperature . The compressor will cycle on
and off to keep the room at the same level of
comfort . When you turn the knob to a higher
number, the indoor air will become cooler . Turn
the knob to a lower number and the indoor air
will become warmer .
ON/OFF Control
Turns air conditioner on and off .
NOTE: If the air conditioner is off and is then turned
on while set in a Cool mode, it will take approximately
3 minutes for the compressor to start and cooling to
begin.