Electrolux EUF2640AOW Notice D'utilisation page 39

REMOVING THE TRANSPORT SUPPORT
3
SPACERS
LEVELLING
Your appliance is equipped with transport
support to secure the door during trans-
portation.
To remove them do these steps:
• Open the door.
• Remove the transport support from the
door sides.
• Remove the transport support from the
lower hinge (some models).
Some models are fitted with a si-
2
lencing pad under the cabinet. Do
not remove this pad.
Install the spacers provided within the ac-
cessory bag as shown in the figures.
Install the spacers on the back side of the
panel.
When placing the appliance ensure that it
stands level. If necessary adjust the feet us-
ing the adjustment spanner supplied.
ENGLISH 39