Publicité
Les langues disponibles
Les langues disponibles
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
It is recommended to have the device checked by the professional service min. once a year. All interventions
must be done by qualifi ed person who is competent for this.
ATTENTION!
The device cannot be cleaned by direct or pressure water. Clean it daily. Daily maintenance keeps longer
useful life and effi ciency of the device. Before cleaning make sure to have disconnected the device from
electricity. Always switch off the main feeder to the device. Stain-less parts wash with moist cleaning cloth
and detergent without groove parts than wash it with clean water and dry it by the cloth. Do not use abrasive
and corrosive detergents.
WHAT TO DO IN CASE OF BREAK-DOWN
Switch off the electric feeder and call seller´s proff esional service.
INDICATION:
Guarentee does not cover all consumption parts succumable to common wear (rubber seals, bulbs, glas and
plastic parts etc.). The guarantee does not refer to the devices which were not instaled in correspondance with
instructions - by qualifi ed worker, in confi rmity with standards and when somebody handled incompetently the
device (interventions into inner equipment) or the device was operated by nonqualifi ed staff or at variance
with instructions for use. Guarantee does not also cover the damages caused due to infl uance of nature or
other outer intervention.
Point for cleaning steel-alloy plate:
•
Heat up the device
•
Turn of the device
•
The plate pull off with scraper
•
Apply water to chemistry (RM gril) and clean the plate from residual dirt and sediment
•
Apply pure water (The solution is with vinegar or lemon)
•
Pull off the water and than to dry the plate with rag
•
Turn on the device up to 70 °C and from the plate let evaporate residual humidity
•
To smear the grill areas with vegetable oil
Point for cleaning chrome plate:
•
Heat up the device
•
Turn of the device
•
The plate pull off with plastic scraper
•
Apply water with a saponate and clean the plate with a sponge
•
Apply pure water
•
Pull off the water and than to dry the plate with rag
•
Turn on the device up to 70 °C and from the plate let evaporate residual humidity
8
8
Publicité
