EINHELL TE-BF 18 Li Mode D'emploi page 12

or Rechargeable (Nickel Cadmium, Nickel
Metal Hydride, or Lithium-Ion) batteries.
6. Do not dispose of batteries in fi re.
7. Batteries should be recycled or disposed of
as per state, provincial and local guidelines.
When shipping or disposing of batteries and
cordless tools, always ensure that they are
packed individually in plastic bags to prevent
short circuits and fi res.
Additional safety instructions
•
Hold the electric equipment only by the
insulated handles because the grinding/
sanding face might strike the equipment's
own power cable. Damaging a live cable
may make the metal parts of the equipment
live and cause an electric shock.
•
This tool may only be used for dry grinding/
sanding operations.
•
Use of the tool on materials containing
asbestos is prohibited.
•
Always remove the battery before carrying
out any work on the machine (cleaning the
machine, changing the abrasive paper, etc.)!
•
Keep your workplace clean and well
illuminated.
•
Make sure that the workpiece is sufficiently
secured so that it cannot slip.
•
Keep children away.
•
For your own sake, keep the machine clean
at all times and check it for signs of damage
each time after using it.
•
Make sure of your footing, particularly when
working on ladders and platforms.
•
Harmful or toxic dust can be produced when
working on wood or metal.
•
Touching or inhaling this dust can be harmful
for the operator and other persons nearby.
•
Important! Wear safety goggles and a
dust mask.
SAVE THESE INSTRUCTIONS
2. Layout and items supplied
2.1 Layout
1. Handle
2. Additional handle
3. Setting wheel for belt speed
4. Locking button
5. On/Off switch
6. Connection for dust extraction adapter
Anl_TE_BF_18_Li_SPK7_USA.indb 12 Anl_TE_BF_18_Li_SPK7_USA.indb 12
EN
7. Sealing plug
8. Dust extraction adapter
9. Clamping lever for grinding/sanding belt
10. Lock knob for adjusting the grinding/sanding
belt
11. Drive roller
12. Grinding/sanding belts
13. Grinding/sanding belt arms
14. Mount for the grinding/sanding belt arm
15. Clamping lever
16. Swiveling gear head
17. Battery mount
18. Battery capacity indicator
19. Battery capacity indicator button
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
•
Cordless file belt sander
•
6x ⁄ " grinding/sanding belts (60/80/120 Grit)
3
8
•
6x ⁄ " grinding/sanding belts (60/80/120 Grit)
1
2
•
1x ⁄ " grinding/sanding belt arm
3
8
•
1x ⁄ " grinding/sanding belt arm
1
2
•
Original operating instruction with safety
information
Separately available accessories
18V 1.5Ah PXC Lithium-Ion battery
18V 2.0Ah PXC Lithium-Ion battery
18V 2.5Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Lithium-Ion battery
18V 4.0Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Plus Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
- 12 -
14.07.2023 09:43:47 14.07.2023 09:43:47