Publicité
Les langues disponibles
Les langues disponibles
2.3 INSTALLATION PROCEDURE – FLUSH MOUNT
1. The flush-mount installation method will have the front face of the fireplace parallel to the face of
the wall. Build frame according to framing dimensions on previous page and ensure a power
source is available.
Top View:
2. It is recommended to install the fireplace after finishing the wall to ensure the unit sits flush with
the wall finishing.
3. After finishing the wall, place the fireplace unit into the wall opening. Ensure the thin metal edge
on both sides of the fireplace is flush with the finishing layer.
Finishing Layer
Stud Wall
© 2023 Dynasty Fireplaces | V 1.0.0
- 11 -
Publicité
