Hisense 50H6D Mode D'emploi page 9

ENGLISH FRANÇAIS
Connecting a USB device
You can connect the USB devices such as hard
drives, USB sticks and digital cameras for browsing
photos, listening to music and watching recorded
videos.
1. Connect a USB device into the USB port.
2. Select the content you want to play or view. For
more information, see
Media on page
NOTES
• When connecting a hard disk or a USB hub, always connect the mains adapter of the connected device to the
power supply. Exceeding a total current consumption may result in damage. The USB1.1 and USB2.0 devices
maximum current consumption are 500mA.
• For individual non-standard high-capacity mobile hard disk, if its impulse current is greater than 500mA, it may
cause TV-rebooting or self-locking. So the TV does not support it.
• The USB port supports a voltage of 5V.
Connecting speakers or other audio receivers
To connect speakers or other audio receivers with an audio cable (not provided):
1. Use an audio cable to connect the digital audio in port of the audio receiver device to the DIGITAL AUDIO OUT
port of the TV. Another option is to use an RCA Y-cable (1/8"-stereo mini to L/R phono) to connect an analog sound
system to the AUDIO OUT port of the TV.
2. Plug the connected devices into the main power socket before switching on the TV.
TV PORTS
DIGITAL
AUDIO OUT
AUDIO
OUT
TIP: If you prefer to use Audio Return Channel, then see
(ARC) on page 8.
NOTES
• When a digital audio system is connected to the DIGITAL AUDIO OUT port, decrease the TV and system volume.
• You can connect the DIGITAL AUDIO OUT port on the back of the TV to the Optical port on the Amplifier. Then go
to the Settings / Menu > Sound > Advanced settings > Digital audio out to select Dolby Digital to receive the
Dolby Digital audio.
ESPAÑOL
28.
Audio Cable
Red(R)
Audio Cable
White(L)
Connecting a digital sound bar to use Audio Return Channel
7
TV PORTS EXTERNAL DEVICE
USB USB
DC 5V 1A(MAX) DC 5V 0.5A(MAX)
EXTERNAL DEVICES
Digital Sound Bar
Powerless
Audio Amplifier
Bass Speaker
Speaker