Symbols On The Product; Risk Levels - GreenWorks DT40L00 Manuel D'utilisation

• When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery
terminal together may cause burns or a fire.
• Do not use a battery pack or appliance that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire，explosion or
risk of injury.
• Do not expose a battery pack or appliance to fire or
excessive temperature. Exposure to fire or temperature
above 130°C may cause explosion. The temperature of
130°C can be replaced by the temperature of 265°F.
• Follow all charging instructions and do not charge the
battery pack or appliance outside of the temperature range
specified in the instructions. Charging improperly or at
temperatures outside of the specified range may damage
the battery and increase the risk of fire.
• Have servicing performed by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the product is maintained.
• Do not modify or attempt to repair the appliance or the
battery pack (as applicable) except as indicated in the
instructions for use and care.
• Any other service should be performed by an authorised
service representative.
• Use only the tine cylinder that the applicance matches,
using other tine cylinder or attachment might increase the
risk of injury.
4

SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this tool.
Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
tool better and safer.
Symbol Name
V Volt
A Amperes
Hz Hertz
W Watt
min Minutes
/min Per Minute
Alternating
Current
Direct Current
No Load
n o
Speed
English
Explanation
Voltage
Current
Frequency (cycles per sec-
ond)
Power
Time
Revolutions, strokes, sur-
face speed, orbits etc., per
minute
Type of current
Type or a characteristic of
current
Rotational speed, at no load
Symbol Name
Safety Alert
Eye Protec-
tion
WARNING
--- Wet Con-
ditions
Read Opera-
tor's Manual
Maintain
Safety Devi-
ces
Looking Be-
hind While
Backing
DANGER ---
Keep Hands
and Feet
Away
DANGER ---
Keep By-
standers Away
DANGER ---
Thrown Deb-
ris
DANGER ---
Steep Slope
Hazard
5

RISK LEVELS

The following signal words and meanings are intended to
explain the levels of risk associated with this product.
SYM- SIGNAL
BOL
DANGER
5
Explanation
Precautions that involve
your safety.
Always wear eye protection
with side shields marked to
comply with ANSI Z87.1
when operating this equip-
ment.
Do not expose the product
to rain or moist conditions.
To reduce the risk of injury,
user must read and under-
stand operator's manual be-
fore using this product.
Do not open or remove
safety devices while the
tool is running.
Look down and behind first
to avoid tripping when pull-
ing back.
To reduce the risk of injury,
keep hands and feet away
from rotating parts. Do not
operate unless discharge
cover or grass bag is in its
proper place. If damaged,
replace immediately.
All visitors should be kept
at a distance from work
area.
Remove objects that can be
thrown by the blade in any
direction. Wear safety
glasses.
Use extra caution on slopes.
do not mow slopes greater
than 15 degrees.
MEANING
Indicates an imminently haz-
ardous situation,which, if not
avoided, will result in death
or serious injury.
EN