emerio FN-114316 Mode D'emploi page 5

PARTS OF DESCRIPTION
1. Fan guard
2. Fan blade
3. Base
4. Remote control receiver
5. Remote control
6. Front shell
7. Control panel
8. Rear shell
9. Indicator lights
Control panel
a. ON/OFF button
b. Speed button
c. Oscillation button
d. Mode button
e. Timer button
Indicator lights
1. Low speed
2. Medium speed
3. High speed
4. Timer
5. Up/down oscillation
6. Left/right oscillation
7. Sleep/natural mode (red light for natural mode; blue light for sleep mode)
Note: The corresponding lights will turn on when the functions are selected.
REMOTE CONTROL
This unit has a remote control. Please use one piece of CR2025 battery for this remote control. Please insert the
battery to the remote control tightly (Refer to the instruction behind the remote control). If it is not in use for a
long time, please take the battery out of the remote control.
The functions of the remote control buttons are almost the same as the functions of the buttons on the control
panel, except two differences as below.
1. For the oscillation button on control panel you will find two buttons on the remote control: "OSC-1" for
left/right oscillation and "OSC-2" for up/down oscillation.
2. Speed settings: While the speed button on the control panel offers three options of speed, the speed button
on the remote control allows more slight selections as below. Bigger numeral means larger wind.
LOW – speed 1, speed 2, speed 3 and speed 4;
MED – speed 5, speed 6, speed 7;
HIGH – speed 8.
- 4 - FN-114316