Télécharger Imprimer la page

Krups ARUBA KM900855 Mode D'emploi page 10

Publicité

Les langues disponibles

Les langues disponibles

English
F o l l o w t h e s t e p s b e l o w t o r u n a f i r s t b r e w c y c l e t o
r i n s e t h e s y s t e m .
n Fill the water tank up to the max level and do not use coffee, coffee filter
or water filter.
n Then follow the instructions 'MAKING COFFEE' and 'DISPENSING
COFFEE'.
n To replace the DuoFilter cartridge first remove it from its plastic covering
Fig.3.
n Rinse the filter cartridge under tap water for 1 minute.
n Unhinge the water filter holder, place the filter into the filter holder.
n Firmly press the filter holder into the bottom of the water tank Fig.4.
MAKING COFFEE
n Open the top lid by pressing the open button (e) Fig.1 and fill the water
tank Fig.5 with cold water taking careful note of the number of cups.
Use filtered water if possible.
For best result in cup, the coffee tank (j) has a scale inside which indicates
the recommended water-per-cup volume. Feel free to use it filling in the
water tank.
For easier pouring and measurement, the water gauge segments blacken
as water rises Fig.6.
n Insert the coffee tank (i) and the brew basket (h) securely in place (b).
Be sure the coffee maker stands on an appropriate counter top. Then
check the coffee tank (i) sits straight on the heating base (b) before
starting the brew cycle Fig.7.
n Add paper filter into the brew basket Fig.8.
n Add ground coffee into the basket Fig.9
• Measure one rounded coffee scoop per 5 oz. cup of water.
• For more details please refer to the brewing guide on page 17
n Close the lid Fig.10. The machine is ready for brewing.
Note : Be careful to put back in place both coffee tank and brew basket
before initiating the brew cycle
n For immediate brewing, press the ON/OFF button (x) and the brew
cycle will begin Fig.11.
- The ON/OFF button (x) will blink red while the machine is brewing and
stay illuminated while the coffee is kept warm on the heating base (b).
12

Publicité

loading