Sony VPL-DX126 Guide De Référence Rapide page 39

USB connector (Type A) (
For connecting a USB wireless LAN module IFU-WLM3 (supplied) ("Presentation Function
via Network").
Tablet PC/Smartphone
Computer
Notes
• Undesignated USB wireless LAN modules do not work.
• When connecting/disconnecting the USB wireless LAN module, make sure that the projector is in
Standby mode (Standby Mode: "Low"), or the AC power cord is unplugged from the wall outlet.
• When wirelessly connecting a tablet PC/smartphone to the projector via USB wireless LAN
Module IFU-WLM3 (supplied), set "Access Point Setup" to "Manual" in the projector's "WLAN
Settings".
• The factory default settings for "Manual" are as follows.
SSID: VPL + MAC address for LAN
Security Method: WEP(64bit)
Password: sony1
)
USB wireless LAN module
IFU-WLM3 (supplied)
Connecting the Projector
13
GB