Kuppersbusch KI8800.0GR Mode D'emploi page 37

INSTALLATION INSTRUCTIONS
The installation must be performed by a qualified electrical contractor. This contractor will take
the entire responsibility of the installation. The installation has to comply with the legislation and
the standards in force in your country.
How to stick the gasket:
The gasket supplied with the hob prevents the intrusion of liquids into the cabinet below.
Its installation has to be done carefully, as described below.
Aeration
Fitting - installing:
• Cut out sizes of the worktop:
KI8800.0GR
KI8800.0SR
KI8800.0SF
A
798 mm 518 mm
800 mm 520 mm
37
Stick the gasket (2) two millimeters
from the external edge of the glass,
after removing the protection tape (3).
B E
750 mm
750 mm
F H
490 mm 53 mm
490 mm 53 mm