Télécharger Imprimer la page

Kuppersbusch KI8800.0GR Mode D'emploi page 30

Publicité

Les langues disponibles

Les langues disponibles

Heating zone selected
[ P ] is displayed
It is possible to activate the booster function (or double booster) on several cooking zones at the
same time, for this it is necessary to use the zones in a discriminant way.
Timer
The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 1 to 999 minutes) for each heating zone.
Setting and modification of the cooking time :
Action
Select the power level
Select theTimer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.
To stop the cooking time:
Action
Select the Timer
Stop the time
If several timers are activated, repeat the process.
Egg timer function :
Egg timer is an independent function. It stops as soon as a heating zone starts up.
If the egg timer is on and the hob is switched off, the timer continues until time runs out.
Action
Activate the hob
Select the Timer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 000 ] and a sound
rings.
To stop the sound and the blinking, press the key [ - ] and [ + ].
The other heating zone: (example: power level 9)
[ 9 ] goes to [ 8 ] and blinks
Control panel
slide on the "SLIDER"
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Press key [ - ] from the timer
Press key [ + ] from the timer
Control panel
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Press key [ - ] from the timer
Control panel
press key [
]
Press simultaneously key [ - ] and [ + ] [ 000 ]
from the timer
Press key [ - ] from the timer
Press key [ + ] from the timer
30
Display
[ 1 ] to [ P ]
[ 60 ] to 59, 58...
Time increase
Display
[ 000 ]
Display
[ 0 ]
[ 60 ] to 59, 58...
Time increase

Publicité

loading

Ce manuel est également adapté pour:

Ki8800.0sfKi8800.0sr