Operation - Yard force X50i Guide D'installation

GB

Operation

Control panel
Indicator meaning
Will flash when lifted or climbing an obstacle.
Will flash when no signal received from boundary wire.
Will flash when battery is low.
Will flash when charging in the docking station.
10
Physical button
LED indicator will show under the working time button that has been selected. Robotic Mower will
go back to docking station when the selected time is over.
LED will show when signal S1 is selected.
LED will show when signal S2 is selected.
LED will flash slowly when there is no Wifi connection
LED will remain on when ready to connect to Wifi.
LED will flash quickly when successfully connected to Wifi.
LED will show when pressed and will lock the control panel.
Start mowing
Press start button and close the top cover, Robotic Mower will start to work after after you hear a
long beep.
Return to docking station
long beep
long
beep
11
GB