Direct Mode - Yard force X50i Guide D'installation

GB
Enjoy your Robotic Mower
This our mower main control interface, you will
battery volume and working mode from upper
graphic and remote console pad from lower side.
*At upper right corner, there will be "..." symbol,
you can click and enter mower parameter setting
interface.
(1) You can find fault, cutting, cahrging and health
history.
(2) Three working time and seven working days
selection is available.
(3) boundary trim function is available and over
boundary cutting distance, boundary singal
select buttons.
(4) Multi-zone cutting function setting, four
seperated area is available.
* This is function is available only for some special
model.
(5) You can choose enable or disable water
sensor function.
(6) You can choose enable or disable ultrasonic
sensor function, you also can set ultrasonic
action distance from 30cm to 60cm.
20

Direct mode

( in case if you do not have WIFI access)
Press and hold WIFI button on mower
console pad and then switch on the main
power of mower.
5s 5s
2 2
Click your Robotic Mower
and left slip, and then you
can share the mower with
your family together, and
more enjoy together.
21
GB