Télécharger Imprimer la page

AENO GS1 Mode D'emploi page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
is in proper condition.
 The steamer does not produce steam. Possible causes: low water level in the
water tank; the water tank is installed incorrectly; device is not turned on or
not plugged in. Solution: unplug the device and fill the water tank; install the
water tank as shown in Figure C; make sure the steamer is turned on and
plugged in, and the socket outlet is in good condition.
 Water drips from the steamer head or leaks out of the tank. Possible causes:
the steamer is not heated to the desired temperature; the water tank cap (3)
is not properly closed. Solution: wait (about 35 seconds) for the red indicator
light (8) to light steadily; install the water tank as shown in figure C.
WARNING! If none of the possible solutions solves your problem, contact your
supplier or service center. Do not disassemble or attempt to repair the device
yourself.
Recycling information
These symbols indicate that you must follow the Waste Electrical
and Electronic Equipment (WEEE) and Waste Battery and Battery
Regulations when disposing of the device, its batteries and
accumulators, and its electrical and electronic accessories.
According to the rules, this equipment must be disposed of
separately at the end of its service life. Do not dispose of the device,
its batteries and accumulators, or its electrical and electronic
accessories together with unsorted municipal waste, as this will harm the
environment. To dispose of this equipment, it must be returned to the point of
sale or turned in to a local recycling facility. You should contact your local
household waste disposal service for details.
ASBISc reserves the right to modify the device and to make edits and changes to this document
without prior notice to users.
The warranty period and service life shall be 2 years as from the date of purchase of the device.
Manufacturer: ASBISc Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101 Limassol, Cyprus. Made in
China. For current information and details on the device description and specification, as well as
connection process, certificates, warranty, and quality issues, see relevant Installation and
Operation Manuals available for downloading at aeno.com/documents. All trademarks and names
herein are the property of their respective owners.
8
aeno.com/documents

Publicité

loading

Ce manuel est également adapté pour:

Ags0001