i-tec CHARGER-C77W Mode D'emploi page 6

EN
SPECIFICATIONS
• Input voltage AC 100-240.0V, 50-60.0 Hz
• Output power (max): 77.0 W
• USB-C output voltage: DC 5.0V / 9.0V / 12.0V / 15.0V / 20.0V
• USB-C output current: max. 3.25 A
• USB-A output voltage: DC 5.0 V
• USB-A output current: max. 2.4 A
• Protection against: current overload, overvoltage, short circuit
and overheating.
• Product dimensions: 130 x 55 x20 mm
• Product weight: 223 g
USING THE POWER ADAPTER
Connecting the universal adapter to the device:
1. Connect the adapter to the 110/230V mains, using the supplied
cable.
2. Then connect the USB-C cable to the USB-C power port of the
charger.
3. The LED indicator will illuminate and charging will begin.
Note: When powering mobile phones and similar devices without
a USB-C connector, you can use the USB-A port on the adapter. Power
over the USB-A port is provided on the assumption that the given
device supports it.
IMPORTANT SAFETY MEASURES:
• Do not pull the power supply cable from the mains socket by
pulling the cable.
• Do not connect to or pull the power cord from the socket with wet
hands.
• Do not connect the adapter if it is damaged (e.g. short circuit,
burnt PVC case).
• Immediately disconnect the adapter from the mains socket
should you smell burning.
• Do not disassemble this device or make modifications, as this
could case a fire risk, injury or damage to personal property.
Entrust all repairs to the manufacturer, i-tec Technologies s.r.o..
• Do not expose the adapter to direct sunlight, place it on heating
elements, or on any other heat. Do not cover it with paper or any
6
Quick Start / Universal Charger USB-C 77W