Sony HANDYCAM DCR-IP1E Mode D'emploi page 66

TAPE TITLE
ALL ERASE
66
Using the Menu
You can label a cassette up to 16 letters.
The label will be displayed for approximately 5 seconds when you set the
POWER switch to the CAMERA-TAPE and insert the cassette or PLAY/EDIT
mode.
1
Select a desired character. Repeat touching a key to select the desired
character on the key.
0:00:00
TAPE TITLE
END
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C c
&? ! ABC DEF
123 678
GH I JKL MNO
45 90
PQR WXY ' . ,
TUV
S Z /– OK
To erase a character: Touch
To insert a space: Touch
2
to move s for the next character, and enter the character in
Touch
the same manner.
3
When you have finished entering characters, touch
4
Touch .
Tips
z
• To erase the label you have created, then touch
then touch .
• To change the label you have created, insert the cassette into your camcorder and go
through the procedure from step 1.
• When you do not want to display the label, set [
(STANDARD SET) menu (p. 70).
You can erase all data such as date, title, and cassette label saved in the micro
Cassette Memory at one time.
1
Touch [YES] twice.
To cancel the operation, select [NO].
2
Touch .
Note
b
• If you have executed [
– Multi-picture search
– Title search
– Date search
.
.
INFO DISP] to [OFF] in the
ALL ERASE], you can not operate the following functions.
.
repeatedly to erase the characters,