Changing The Bulb; Faq - Candy FCP815X E0 Notice D'emploi Et D'installation

CHANGING THE BULB

1. Disconnect the oven from the mains supply.
2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.
3. Once the defective bulb is replaced, replace the glass cover.
5. Troubleshooting

5.1 FAQ

PROBLEM
The oven does not heat up
The oven does not heat up
No reaction of the touch
user interface
POSSIBLE CAUSE
The clock is not set
A cooking function and
temperature has not been set
Steam and condensation on
the user interface panel
EN 10
SOLUTION
Set the clock
Ensure that the necessary
settings are correct
Clean with a microfiber cloth the user
interface panel to remove the
condensation layer