Philips 42HF7443/10 Mode D'emploi page 7

In the Program Installation sub-menu, program settings can be set. When this menu is open, all the
protections are inactive.
• Program No.: The program type can be selected with the cursor left/right buttons. These buttons
will toggle between all available types: "TV", "INFO", "PAYTV" and "RADIO".
If the program number of a certain type is 0, the corresponding type is not displayed. In order to
display a program number of the above-mentioned types, always enter two numbers, for example:
"01" for TV1 or digit "1" and up/down cursor.
• Input: The "Input" menu item selects the desired input source that will be assigned to the program.
Possible values are TUNER, AV1, AV2, SIDE AV, SIDE S-VIDEO, RADIO, and DVI. Some
input sources may not be available on certain sets (see accompanying table).
Model / Input
15HF5443
20/23HF5473
26HF5473
32HF7473
42HF7443
Note: When a SmartCard XPress Box is used, it is usually connected to Scart1.
AV1 AV2
Scart1 -
Scart1 -
Scart1 Scart2 CVBS
Scart1 Scart2 CVBS
Scart1 Scart2 CVBS
- 7 -
Side AV Side S-Video
Video In S-Video In
Video In S-Video In
AV-In S-Video In
AV-In S-Video In
Video In S-Video In
DVI
DVI
DVI
DVI
DVI
DVI