Publicité
Les langues disponibles
Les langues disponibles
Installing the handle
Your appliance has a top handle. To fit it, simply screw it onto the door with the screws supplied as per the diagram below,
having first removed the seal.
Reversible shelves
In order to optimize the loading of bottles in the cellar, we have designed a special shelf that allows turning to coordinate
the inversion of the door.
In the standard configuration with the hinge on the right, A is close to the hinge and B (front with label holder) upwards
as in photo 1.
After reversing the direction of the door, you must coordinate the shelves.
1. Turn all the shelves over, A will be on the left and B will be on an downwards position.
2. Release the screw on the wooden front as shown in photo 3 so that B is upwards and fix it again.
3. Make sure that A is close to the hinge and B is upwards as shown in photo 2.
5. OPERATING INSTRUCTIONS
It is recommended that you installed your appliance in a place where the ambient temperature is
between 10-38°C. If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected and it may not be possible to obtain temperature between 5- 20°C.
The ambient temperature has an impact on the interior temperature and humidity of your cellar. For optimal
operation, the settings of your cellar are made for ambient temperatures of 23°C to 25°C.
41
Publicité
