Publicité
Les langues disponibles
Les langues disponibles
Operations
Description of the hood
A
A. Fan and light controls
B. Strip LED
Control
The hood is designed to remove smoke, cooking vapors
and odors from the cooktop area. For best results, start
the hood before cooking and allow it to operate several
minutes after the cooking is complete to clear all smoke
and odors from the kitchen.
The hood controls are located on the center side of the
hood.
A
A. Light knob
B. Fan knob
B
C
D
C. Filter
D. Filter handle
B
Operating the lights
1.
Turn the light knob to the "ON" position to turn the
hood lights On.
2. Turn the light knob to the "OFF" position to turn the
hood lights Off.
Operating the fan
1.
Turn the fan knob on "Low" to turn the hood on.
2. Turn the fan knob to the desired speed position.
3. Turn the fan knob to the "Boost" position to turn the
hood on maximum.
4. Turn the fan knob to the "OFF" position to turn the
hood fan Off.
Auto On fan
The hood is equipped with a sensor to automatically
turn on the fan when excessive heat is detected in the
area. This sensor will turn the fan to boost speed when
necessary. When the heat decreases, the fan will be back
to previous setting.
CFM reduction
When the CFM reduction wire is connected, both "High"
and "Boost" will perform with "High" setting.
"High" and "Boost" settings are max. 410 CFM for single
fan model and max. 810 CFM for double fan models.
ENGLISH 7
Publicité
