Delete Data; Maintenance And Care - Valley Electronics Lady-Comp Mode D'emploi

Masquer les pouces Voir aussi pour Lady-Comp:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

24
Create your fertility report
Turn the device counterclockwise and connect Lady-Comp with
your computer via the USB cable. Copy the file *.txt into a local
folder and load the file into the form displayed on our website
lady-comp.com/analyser
To close the device, place the notches of the 2 parts of
the device slightly offset on each other and turn the device
clockwise.

Delete data

To delete all entered data, you have to press the minus button in the menu
"Delete data" 10 times in a row. This will fill the circles of the display step by
step. If the deleting is successful, you will hear a signal tone.
Cleaning
Clean the sensor of Lady-Comp carefully with a damp cloth. You can also use
a small amount of alcohol or soap. Make sure that only the mouthpiece comes
into contact with liquid, as Lady-Comp is not waterproof.
Batteries
– 2 pieces, Micro AAA, 1.5 Volt or equivalent AAA batteries
The batteries must be changed while Lady-Comp is turned off.
– Follow your local battery disposal instructions.

Maintenance and care

– Lady-Comp has a life span of 5+ years.
– Protect Lady-Comp from wetness and moisture to prevent damage.
Do not place Lady-Comp on/in a heat generator, such as a microwave
oven, an oven or radiators.
25

Publicité

Table des Matières
loading

Table des Matières