Krick RoMarin Antje Mode D'emploi page 40

3.49
3.44
3.45
Fig. parts for companionway
Stain before assembly.
Fig. front wall with door
Fig. side parts at front wall
3.47
3.48
Fig. floor
Glue the support strips part 3.48 to the side of the
floor.
Glue the floor into the companionway.
Stand Mai 2019
M
T
.com
3.50
3.47
3.46
3.51
3.51
3.45
3.44
3.46
Seite 12
Fig. floor glued in
3.49
Fig. Glue rear wall on
First glue the rear wall to the upper edge.
Fig. auxiliary blocks
Then glue 2 blocks of 3 mm residual wood to the
bottom of the side wall. These serve as a counter-
support for the clamps to hold the rear wall in
place for gluing. When the glue has dried, the back
wall can be glued to the sides, to the bottom and
to the blocks.
©
Krick Modelltechnik Knittlingen
auxiliary blocks