Hilti SR 6-A22 Mode D'emploi page 21

9.1 The reciprocating saw is not in working order
Trouble or fault
Power tool does not
start.
The saw blade can-
not be removed from
the chuck.
9.2 The reciprocating saw is in working order
Trouble or fault
The tool does not
achieve full power.
The saw blade can-
not be removed from
the chuck.
10 Disposal
Most of the materials from which Hilti tools and appliances are manu-
factured can be recycled. The materials must be correctly separated before
they can be recycled. In many countries, your old tools, machines or appli-
ances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
representative for further information.
Battery disposal
Improper disposal of batteries can result in health hazards from leaking
gases or fluids.
▶ DO NOT send batteries through the mail!
*2186515*
Possible cause
The battery is not cor-
rectly inserted.
The battery is empty.
The transport lock is
engaged.
The locking lever was
not pushed as far as it
will go.
Chuck clogged by
residues from sawing
operations.
Possible cause
The control switch is not
fully pressed.
The battery is
discharged.
The locking lever was
not pushed as far as it
will go.
2186515
Action to be taken
▶ Push the battery in
until it engages with a
click.
▶ Charge the battery.
▶ Disengage the trans-
port lock.
▶ Push the locking lever
as far as it will go and
remove the saw blade.
▶ Remove the residues
from sawing opera-
tions and regularly
clean the chuck from
the outside. Care
of the power tool.
→ page 13
Action to be taken
▶ Press the control
switch fully.
▶ Change the battery
and charge the empty
battery.
▶ Push the locking lever
as far as it will go and
remove the saw blade.
English 15