Pioneer DEH-3400R Mode D'emploi page 13

Built-in CD player
Playing a CD
1
1 indicator
TRACK NUMBER
Shows the track currently playing.
2 indicator
PLAY TIME
Shows the elapsed playing time of the cur-
rent track.
1 Press to open the front panel.
OPEN
CD loading slot appears.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
button
CD EJECT
• You can eject a CD by pressing
3 Close the front panel.
• After a CD has been inserted, press
to select the built-in CD player.
4 Use to adjust the sound level.
VOLUME
Rotate to increase or decrease the volume.
2
.
CD EJECT
SOURCE
5 To perform fast forward or reverse, press
and hold 2 or 3 .
6 To skip back or forward to another track,
press 2 or 3 .
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• The built-in CD player plays one, standard,
12-cm or 8-cm (single) CD at a time. Do not
use an adapter when playing 8-cm CDs.
• Do not insert anything other than a CD into
the CD loading slot.
• If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press to eject the disc, and check
CD EJECT
the disc for damage before inserting the disc
again.
• If the built-in CD player does not operate prop-
erly, an error message such as
be displayed. Refer to Understanding built-in
CD player error messages on page 19.
may
ERROR-14
12
En