Philips HD7854 Mode D'emploi page 9

Flushing causes the boiler to be filled with water. After this, the machine is
ready for use.
Flush the machine in the following way:
1 Place a bowl with a capacity of at least 1.5 litres on the cup tray.
2 Fill the water reservoir with cold water up to the MaX indication
and put it back onto the machine.
3 Make sure that the milk container unit is in place.
2
1
4 Make sure that a pod holder, without pod or pods, is in place.
5 Put the plug in an earthed wall socket.
6 Press the on/off button 3.
The light rings around the 1-cup button q and the 2-cup button
,
qq light up continuously.
EnglisH
9