Publicité
22. FILTER CHANGE: The high efficiency filter(s) in the unit cannot be washed, they can only be
replaced. The filter change icon
purifier may equip with more than one filter, so please refer to the Electrolux App for details
on which filter layer is to be replaced. Always ensure the plastic protective bag is removed
before its use in the unit. After the used filter is replaced, the filter change icon will turn off
automatically and no reset action is needed.
23. WATER TANK: The water tank icon
humidifying. After the water tank is refilled, the water tank icon will turn off automatically and
no reset action is needed.
24. WiFi: The unit is equipped with a WiFi module, which enables remote control and access to
many more features including time-based tracking of your indoor air quality data. When the
unit is connected to the home WiFi, this icon
temporary loss of WiFi connectivity – please refer to the Electrolux App for more details.
NOTE: Download our Electrolux App and follow the step-step onboarding instructions to bring
the air purifier online.
25. IONIZER: The unit is equipped with an ionizer module, which will enabled generates negative
ions to further improve air purification process. The ionizer is OFF by default, press and hold
MODE & FAN button simultaneously for 3 seconds to activate the ionizer feature. When the
ionizer feature is activated, the ionizer icon
the App. For more details on how an ionizer helps reduce airborne particles, please refer to the
product information page on the website.
26. SCHEDULER: show a scheduled event from the app is running.
27. CHILD LOCK: The unit is equipped with a safety lock feature to disable the product control
panel to avoid unintended pressing. Press and hold MODE & POWER button simultaneously for
5 seconds to activate the child lock feature. The child lock icon
is activated. When the control panel is locked, you can only make changes via App.
28. AIR QUALITY INDICATOR: The unit is equipped with an air quality sensor. The laser-based
particulate matter (PM) sensor is a high precision particle sensor that can detect PM1, PM2.5
and PM10 levels. The air quality indicator will visually – with the aid of a color scale - show the
real-time air quality as per table below. When in SMART mode, the air quality level will also
determine the fan speed as per table below.
LIGHT'S COLOR
Green
Yellow
Orange
Red
Purple
Maroon
NOTE: Please ensure regular cleaning of the sensor window to ensure it does not get clogged
with dust and sensors keep performing accurately. Also ensure optimal humidity levels
(between 35-80%) for accurate reading from the sensors.
HOOD ADJUSTMENT
29. HOOD: The unit is equipped with a hood to give a comfortable air environment. Adjust the air
outlet direction by pulling up the hood manually. The hood can be adjusted in desired angle
between 6˚ - 90˚.
www.electrolux.com
will light up to remind you to change your filter(s). Your air
will light up to remind you refill the water tank for
3
PM 2.5 (μg/m
)
0-12
13-35
36-55
56-150
151-250
>250
will light up. If the icon is blinking, it indicates a
will light up. You can also activate the Ionizer via
AIR QUALITY
Very Good
Good
Poor
Very Poor
Bad
Very Bad
will light up when the feature
9
Publicité
