Publicité
22
Refer to pages 7-11 for further details about the description of the images.
To enjoy peace of mind register your appliance today at www.electrolux.com.
Stay updated on better living services, safety notices and shop for accessories that match your appliance.
Features might be added or updated with new app releases.
UNBOXING & SETUP
Please be careful while unboxing the air purifier. The unit has several detachable components
which may have come loose in transport, so open the box with care and while placed on a large
flat surface on the floor.
1. Taking the humidification filter from the top pulp and remove the plastic bag of it. Then gently
lift out the unit from the box, remove the plastic packaging and discard as per safety and local
recycling instructions.
2. Remove the water tank from the back of the unit.
3. Remove the side panel and pull out the humidification filter drawer.
4. Take out the humidification filter drawer and then place the humidification filter, humidification
filter drawer and side panel back into the unit in the same order as originally found. (refer to
image 1).
5. Unscrew the cap and fill the tank with water. Close the cap tight and replace the water tank
onto the unit. (refer to image 4).
6. Remove the front panel by gently pulling it away from the unit with both hands.
7. Take out the mesh pre-filter, ultrafine particle filter and VOC odor filter and remove all plastic
packaging. Discard as per safety and local recycling instructions.
8. Place the filters back into the unit in the same order as originally found (i.e. VOC odor filter goes
in first).
9. Attach the mesh pre-filter and the front panel back to the unit. (refer to image 5&6).
10. Plug the unit's power cord to the nearest power socket so that the ON/OFF button on the
product control panel gets illuminated.
11. For best results, operate the unit in an enclosed area with doors & windows closed when
feasible.
CONTROL PANEL STATES
12. STANDBY STATE: Once plugged, the unit is on standby state, the indicators on the control panel
are dimmed except POWER button (30%) and Wifi icon (will only blink if activating onboarding).
13. DAY & NIGHT: The unit is equipped with a light sensor, which measures the light conditions in
the room. The sensor will dim the light intensity of the display and limit the fan speed to fan
speed 2 when using the product in a dark room to give a non-disturb user experience during
night time.
14. INACTIVE STATE: If user does not interact with the control panel for over 15 seconds, the control
panel will enter inactive state where the active buttons and indicators are dimmed to 30%, and
the rest of the display panel will be fully dimmed.
www.electrolux.com
23
24
1
Max 40°C
2
2
WEEKS
7
Publicité
