Télécharger Imprimer la page

Dik Geurts Jannik Medium Low RS Instructions D'installation page 23

Publicité

Les langues disponibles

Les langues disponibles

IN S TA LLA TION M A N U A L
Contents
1. Introduction
2. EC Declaration of Conformity
3. SAFETY
3.1 General
3.2 Regulations
3.3 Precautions/safety instructions during installation
4. Unpacking
5. Installation
5.1 Regulations
5.2 Flue duct
5.3 Convection
5.4 Appliances with fan(s)
5.5 Country-specific installation requirements
5.5.1 HETAS amendments
5.5.2 The Clean Air Act 1993 and Smoke Control Areas
5.6 Outside air connection
5.7 Installing the fire
5.7.1 Free-standing/design fires
5.7.2 Insert fires (existing and new situation)
5.7.3 Built-in fires
5.8 Completing installation
6. Delivery
7. Maintenance
8. Malfunctions
9. Appliance-specific information
9.1 Smoke control area United Kingdom
9.2 Air slide valve and flue gas exhaust
9.2.1 Air slide valve
9.2.2 Flue gas exhaust
9.3 Interior lining
9.3.1 Vermiculite
9.3.2 Flame baffle plate
9.4 Adjusting the door / Replacing door seal
9.5 Supplementary installation instructions per appliance
9.5.1 Jannik Medium Low EA / Jannik Medium Low RS
9.5.1.1 Outside air connection
9.5.1.2 Adjusting the door / Replacing door seal
9.5.1.3 Disassembly of glass pane in door
9.5.1.4 Assembly of glass pane in door
9.5.2 Keld 5 Low EA / Keld 5 Low RS, Ivar 5 Low EA / Ivar 5 Low RS and Aste 5 Low EA / Aste 5 Low RS
9.5.2.1 Outside air connection
9.5.2.2 Assembly/disassembly of glass pane in door
9.5.2.3 Replacing door seal
9.5.2.4 Heat shield
9.5.3 Keld 5 High EA / Keld 5 High RS and Ivar 5 High EA / Ivar 5 High EA
9.5.3.1 Outside air connection
9.5.3.2 Assembly/disassembly of glass pane in door
9.5.3.3 Replacing door seal
9.5.3.4 Heat shield
9.5.4 Ivar 5 Store EA / Ivar 5 Store RS
9.5.4.1 Outside air connection
9.5.4.2 Assembly/disassembly of glass pane in door
9.5.4.3 Replacing door seal
Annex 1: Parts included with delivery
Annex 2: Technical information
23

Publicité

loading