Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE - Continued
Get even more cleaning from your Shark
Resetting the Motor
Thermostat
Bookmark the page and check back often
Your Shark Navigator® is
to take advantage of the latest products,
equipped with a protective
Motor Thermostat. If the
motor should overheat,
the thermostat shuts off
the power.
ADDITIONAL ACCESSORIES (AVAILABLE FOR
PURCHASE):
NOTE: Some accessories may be included with
your purchase.
To order Additional Parts
15
s h a r kc l e a n . c o m
Navigator
by checking out our cleaning
®
accessories at sharkclean.com.
promotions and prices!
MULTI-TOOL
Convenient crevice tool and dusting brush in one.
PET/UPHOLSTERY TOOL
Perfect for grabbing pet hair and lint from
furniture and other upholstered surfaces.
CREVICE TOOL
Clean in corners and other tight spaces or
reach baseboards and ceilings with this slim
crevice tool.
PART
& Accessories go to
Stretch Hose
sharkclean.com.
Multi-Tool
Foam & Felt Filter XFL100
Extension Wand
24" Crevice Tool
11" Crevice Tool
Pet/Upholstery Tool 128FFJ
All manuals and user guides at all-guidesbox.com
TROUBLESHOOTING
WARNING:
disconnected before performing maintenance/troubleshooting checks.
PROBLEM
Vacuum will not run�
Vacuum is not picking
up dirt�
Airflow is restricted�
No suction or light
suction�
Brushroll does not
turn on�
Vacuum turns off
on its own�
PART NO.
126FFJ
127FFJ
1116-FC
122FFJ
129FFJ
To purchase replacement parts, please visit our website: sharkclean�com�
To reduce the risk of electric shock, the power cord must be
POSSIBLE REASONS & SOLUTIONS
Check to see if the vacuum is plugged in properly.
Check the circuit breaker/fuse.
Check the On/Off button.
Check filters to see if they need cleaning. Follow
instructions for rinsing and drying the filters before
reinserting back into the vacuum. (See Maintenance
section for instructions.)
Dust cup may be full; empty dust cup.
Check hose and hose connections for blockages; clear
blockages if required.
If dust cup is empty, and attachment inlets are clear,
check for other blockages. (See Checking for Blockages
for instructions.)
Move the Brushroll button to the ON position.
The brushroll indicator light will illuminate green.
Place your foot on the power nozzle and tilt the handle
back to engage the brushroll.
If the brushroll indicator light on the nozzle is red,
see the Checking for Blockages section for more
information.
This vacuum cleaner is equipped with a motor-
protective thermostat. If for some reason your vacuum
overheats, the thermostat will automatically turn the unit
off. Should this occur, perform the following steps to
restart the motor thermostat:
1. Press the Power button to the OFF position.
2. Unplug the vacuum.
3. Empty the dust cup and clean filters.
(See Maintenance section for instructions.)
4. Check for blockages in hose, accessories, and
inlet openings. (See Checking for Blockages
for instructions.)
5. Allow the unit to cool for a minimum of 45 minutes.
6. Plug in the vacuum.
7. Press the Power button to the ON position to
restart the vacuum.
Note: If vacuum still does not start, contact Customer
Service at: 1-800-798-7398.
16
s h a r kc l e a n . c o m
Publicité
