RealFlame Bryon C12700LP Mode D'emploi page 16

GAS COMPONENT CONNECTION CHECKS
Pilot Light
Thermocouple
3. Make sure that the igniter pin and thermocouple are correctly positioned.
- The igniter pin should be pointed at the pilot light.
- The thermocouple should be positioned 5mm away from the pilot light.
Thermocouple
wire
4. Make sure that the thermocouple wire is correctly positioned. The thermocouple
wire should be in line with the valve.
5mm
Pilot Tube
Valve
Igniter Box
16
Igniter Pin
Thermocouple Wire
Valve
Wire should
be in line
with valve