Publicité
Les langues disponibles
Les langues disponibles
CUTOUT REQUIREMENTS
Figure 3. Cutout dimensions and requirements
CUTOUT
A
WIDTH
30"
28-11/16"
(76.2cm)
(72.9 cm)
28- 15/16"
(73.5 cm)
36"
34-1/16"
(91.4cm)
(86.5 cm)
34- 5/16"
(87.2 cm)
IMPORTANT
Under the cooktop it is necessary to install a partition,
as shown in ¿JXUH
Important Preparation Suggestions
1. Chamfer all exposed edges of decorative laminate
to prevent damage from chipping.
2. Radius corners of cutout and file to Insure
smooth edges and prevent corner cracking.
Recommend 1/4"or 3/8"diameter drill In each
corner.
3. Rough edges, inside corners which have not been
rounded and forced fits can contribute to cracking
of the countertop laminate.
F
B
C
19-1/4"
30"
(49.0 cm)
(76.2 cm) min
19-5/8"
(49.8 cm)
19-1/4"
36"
(49.0 cm)
(91.4 cm) min
19-5/8"
(49.8 cm)
* NOTE
24" (61 cm) min. clearance if bottom of wood or metal cabinets is
SURWHFWHG E\ QRW OHVV WKDQ ³ FP ÀDPH UHWDUGDQW PLOOERDUG
covered with no less than No. 28 MSG sheet steel 0.015" (0.04 cm)
stainless steel, or 0.024" (0.06 cm) aluminum or 0.020" (0.05cm)
copper. 30"(76.2 cm) min. clearance between top of cooking platform
and bottom of unprotected wood or metal cabinet
G
WALL COVERING CABINETS,
AND COUNTERTOP MUST
WITHSTAND HEAT UP TO 93° C (200° F)
C
E
D
D
18" (45.7 cm)
30" (76.2 cm)
min
min.
Height from
(see note*)
countertop
Clearance
to nearest
from
cabinet on
countertop to
either side of
unprotected
unit
overhead
surface
This cooktop has been designed with wide
tolerances of cut-out to cover possible
replacement with other brands. We recommend to
that you consider the minimum dimension of cut-
out size In the case of new Installation.
Some cut out sizes for possible replacements:
Dim.
Inches
• 30"
28-15/16" x 19-5/8"
• 36"
34-5/16" x 19-5/8"
Installation Manual
E
F
2" (5 cm) min
Clearance
from cutout to
side wall on
the left and
right of the
unit
cm
73,5 x 49,8
87,2 x 49,8
ENGLISH
G
13" (33 cm)
Depth of
unprotected
overhead
cabinets
5
Publicité
