Télécharger Imprimer la page

Lincar Monellina 176AN PLUS Instructions page 26

Publicité

Les langues disponibles
  • FR

Les langues disponibles

To guarantee a perfect combustion , it's
necessary to keep the combustible in a
very dry and protected area.
The wood – output depends on its
relative humidity in %. (see the schedule
enclosed ).
2.3 STARTING
The appliance should set at work only after having completed the following operations:
complete assembling, connection to exhaust fumes duct and to the heating plant. A new
appliance needs to complete the drying process of the paint. During the first heatings you
can notice the following situations:
- During the first ignitions the appliance may exhale bad smell. We suggest a good
aeration of the room till bad smells have been eliminated.
- The complete drying process will be obtained after some heating operations
The equipment is a wood stove with a functioning as Normative EN 13240.
Thanks to combustion chamber structure, the equipment has an high calorific efficiency.
WOOD LOADING
The stove should be loaded manually during the functioning.
The loading of combustible should be done when the flame is minimum to avoid
combustion products or fumes outlet from the fire door.
To open the fire door, employ the fixture enclosed.
STARTING AND FUNCTIONNING
N.B. For starting never use alcool, fuel or other liquid combustibles
In case of starting during particular cold days or with low pressure, it's advisable to heat
the chimney burning papers in stove.
For wood burning loads please read the chapter "Technical Data " and follow the
instructions indicated for quantities.
IGNITION
To arrange on foyer a cube-lighting or a small quantity of paper, around 0,5 kg of wood
in small pieces. Open entirely the prime and secondary air, light the paper and close the
foyer door.
When the stove is completely lighted, add some larger wood pieces. Repeat this
operation till when the stove has reached the " Hourly Charge " as indicated in the
technical details, than regulate the prime and secondary air as indicated in the chapter
Regulations.
During the stove's functioning, it's advisable to set several times the ash-grate to clean
often the brazier.
IT IT IT IT- - - - GB
GB- - - - FR
FR- - - - ES
GB
GB
FR
FR
26/76
ES- - - - DE
DE mod. 176AN PLUS
ES
ES
DE
DE

Publicité

loading