Dacor Distinctive DECT304 Instructions D'installation page 8

ENGLISH
CONDUIT OPENING
Figure 10
Figure 11
THE CONDUIT IS 4 FEET LONG
The junction box, must be located where it will
allow considerable slack in the conduit for
serviceability.
Important:
For solid surface material installations such as
Surel™ and Corian
manufacturer. Apply heat reflective tape such as
Scotch® Aluminum Foil Tape #425 or #427
around the cutout so that it folds over on the top
and sides.
Do not wrap the tape underneath the cooktop.
Be sure the tape extends beyond the outermost
flange of the cooktop. All corners should be
covered with tape.
8
WARNING
®
, consult with solid surface