Onkyo TX-L20D Manuel D'instructions page 13

> Before Start > Part Names
Initial Setup with Auto Start-up Wizard
Initial Setup
1
TV's remote controller
3
12
> Install > Initial Setup
2
4
> Playback
Advanced Setup | Firmware Update | Others
Initial Setup starts automatically
1. Switch the input on the TV to that assigned to the unit.
2. Put batteries into the remote controller of this unit.
3. Press Í on the remote controller. When power is turn on
for the first time, an Initial Setup screen is automatically
displayed on the TV to allow you to make settings
required for start up.
Initial Setup
Language Select
4. Follow the on-screen instructions to select the item with
the cursors of the remote controller and press ENTER to
confirm your selection.
0 To return to the previous screen, press
To redo Initial Setup: If you terminate the procedure on the
way or want to change a setting made during Initial Setup,
press on the remote controller, select "6. Miscellaneous"
- "Initial Setup" in the Setup menu and press ENTER. To
select the language displayed again, change "OSD
Language". ( P30)
English
Deutsch
Français
Español
Italiano
Nederlands
Svenska
Русский язык
中文
Exit
.
E
N