Electrolux EFLW317TIW Instructions D'installation page 9

Removing shipping hardware
IMPORTANT
Failure to remove shipping hardware completely could result in damage to the appli-
ance, damage to your home, or unexpected washing results.
Save all shipping bolts and spacers for future use. If the washer is to be transported at a
later date, the shipping hardware must be reinstalled to help prevent shipping damage
For 300 Series:
Remove all of the following:
4 BOLTS
4 SHIMS
4 BLACK SPACERS
3 P CLAMPS
NOTE
Rubber expansion material on spacers may need time to relax before they can be easily
pulled through shipping hole.
Unpacking Washer
P Clamps
For 400, 500, and 600 Series:
Remove all of the following:
5 BOLTS
5 SHIMS
4 BLACK SPACERS
4 P CLAMPS
1 WHITE SPACER
Installing hole plugs
Locate hole plugs in the small bag sup-
plied with washer instruction guides. Insert
them in the holes in the washer back panel
where the shipping hardware has been
removed.
x7
Shipping Fork
(on select models)
White Spacer
(on select models)
Black Spacers
Shims
1 SHIPPING FORK
9
Bolts