Philips PERFECTCARE PURE GC7600 Mode D'emploi page 9

4 Press and hold the steam trigger to start ironing. Keep the steam
trigger pressed continuously when you move the iron over the fabric.
Note: When you use the appliance for the first time or after replacement of
the ANTI-CALC cartridge, it may take 10 seconds for steam to come out of
the appliance.
Note: The steam generator is equipped with a pump to guarantee a powerful
steam performance. The pump is activated each time you press the steam trigger.
It produces a loud pumping sound when there is no water in the water tank.
steam boost function
- Use the steam boost function to remove stubborn creases. Press the
steam trigger twice quickly.
Vertical steam ironing
Hot steam is emitted from the iron. Never attempt to remove creases
from a garment that someone is wearing. Do not apply steam near your
or someone else's hand.
You can use the steam iron in vertical position to remove wrinkles from
hanging fabrics.
1 Hold the iron in vertical position, press the steam trigger and touch
the garment lightly with the soleplate.
Putting down the iron during ironing
- During ironing, you can place the iron either on the iron platform
or horizontally on the ironing board. Thanks to the OptimalTemp
technology, the soleplate will not damage the ironing board cover.
Energy saving
ECo mode
By using the ECO mode (reduced amount of steam), you can save energy
without compromising on the ironing result.
ENGLIsh
9