Toxic TX-400 Mode D'emploi page 29

- If there are pickups from external electrical sources into the speaker
cables, divide the core leads and twist them together.
- If there are noises from the car electrics, add an interference
suppression choke into the power wiring.
- If there are humming noises, use thicker ground cables or add further
ground cables to the chassis.
- To reduce contact resistance and bad and loose contacts, please tin the
cable ends or use multicore cable ends, spade terminals or others. Gold-
plated spade terminals are free of corrosion and have the lowest contact
resistance.
- Should all these measures be without any success, the use of a ground
loop isolator may solve the problem.
WE WANT YOU LISTENING FOR A LIFETIME
Used wisely, your new sound equipment will provide a lifetime of fun and
enjoyment. Since hearing damage from loud noise is often undetectable
until it is too late, we recommend you to avoid prolonged exposure to
excessive noise.
29
®
© Toxic 2004