Philips Senseo Viva Cafe HD7835/16 Mode D'emploi page 9

Flushing the machine to fill the boiler
YOU CANNOT BREW COFFEE IF YOU HAVE NOT FLUSHED THE
SENSEO COFFEE MACHINE FIRST!
®
The flushing cycle causes the boiler to be filled with water. After this, the
coffee machine is ready for use.
Flush the machine in the following way:
1 Remove the water reservoir.
2 Fill the water reservoir with cold water up to the MaX indication
and put it back onto the machine.
3 Put the water reservoir back.
4 Put a bowl (with a capacity of at least 1500 ml) under the spout
openings to collect the water.
Note: The 1-cup pod holder is already in the machine. Leave the pod holder in
the machine when you flush it.
5 Make sure a pod holder, without pod or pods, is in place.
6 Put the plug in an earthed wall socket.
EnglisH
9