Sony BRAVIA KDL-40BX450 Mode D'emploi page 37

Channels
The desired channel cannot be selected
• Switch between digital and analogue mode and
select the desired digital/analogue channel.
Some channels are blank
• The channel is for scrambled/subscription service
only. Subscribe to a pay TV service.
• Channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.
Digital channels are not displayed
• Contact a local installer to find out if digital
transmissions are provided in your area.
• Upgrade to a higher gain aerial.
General
The TV turns off automatically (the TV enters
standby mode)
• Check if the "Sleep Timer" is activated (page 31).
• Check if the "Idle TV Standby" is activated
(page 32).
Some input sources cannot be selected
• Select "Video Labels" and cancel "Skip" of the input
source (page 31).
The remote does not function
• Replace the batteries.
HDMI equipment does not appear on "HDMI Device
List"
• Check that your equipment is compatible with
Control for HDMI.
Cannot select "Off" in "Control for HDMI"
• If you have connected any audio system that is
compatible with Control for HDMI, you cannot select
"Off" in this menu. To change the audio output to the
TV speaker, select "TV Speakers" in the "Speakers"
menu (page 25).
Lost password
• Select the "PIN Code" settings on the "Parental
Lock" settings, then enter the following master
password: 9999.
37
GB