Télécharger Imprimer la page

GE AFHC32AM Manuel Du Propriétaire page 7

Masquer les pouces Voir aussi pour AFHC32AM:

Publicité

Les langues disponibles

Les langues disponibles

Using the air purifier.
ge.com
Packaging must be removed from the True HEPA Filter before using your air purifier for the first time.
Pull the bottom of the front cover toward you
and lift up slightly to remove.
Pull forward on the black Pre-Filter, using the pull
tabs in the middle, and remove it from the unit.
Pull tabs
Gently pull forward on the 99.97% True HEPA
Filter to remove it from the unit. Remove the
plastic shipping cover from the filter and discard.
Replace the 99.97% True HEPA Filter in the unit.
There is a fixed gasket on the edges of the filter.
That side goes toward the back of the unit. There
is a tab on the front side of the 99.97% True
HEPA Filter that says "FRONT."
If you are choosing to use the Charcoal Filter,
install it in the back of the Pre-Filter now. Slide
the Charcoal Filter under the tabs on the back
side of the Pre-Filter. Install with the Charcoal
Filter facing the 99.97% True HEPA Filter.
7

Publicité

loading