GE AFHC32AM Manuel Du Propriétaire page 11

Air Intake and Outlet and Ventilation Grille
Clean the Air Intake and Outlet around the Particle
Sensor and the Ventilation Grille with a damp cloth.
Be careful not to let dust fall back into the unit.
Particle Sensor
The Particle Sensor should be cleaned every
2 months. It is located on the right side of the unit.
To clean:
■ Open the cover.
■ Use a wet cotton swab to clean the lens,
dust intake and outlet.
■ Wipe with a second cotton swab to dry.
Failure to clean the sensor regularly will result in
a malfunctioning of the particle sensor. The sensor
will need to be cleaned more often depending
on the amount of dust in the area.
ge.com
Ventilation grille
Outlet
Intake
Lens
11