Wiring Diagram - CDVI PROFIL100EINT Manuel D'installation

INSTALLATION MANUAL
PROFIL100EINT
Illuminated Mullion Weatherproof Keypad Self Contained

5] WIRING DIAGRAM

INT1 :
Code change
by the user
(set the switch
to ON).
INT1 INT2
This product is delivered with a varistor.
The varistor must be installed directly on the terminals of the strike (electromagnetic lock, motor, etc.)
controlled by the device. If the device operates with several strikes, each must be equipped with a varistor.
The varistor prevents voltage surges caused by the coil of the strike – self effect. If the "shear lock" type of
electromagnetic lock is used, it must be connected to a separate power supply from the PROFIL100EINT!
cdvi.com
4
cdvigroup.com
Black
INT2 :
Memory reset Red
switch
(set the switch
Purple
to ON).
Pink
Light bleu
Light green
Dark green
Dark blue
Brown
Orange
Yellow
White
Grey
Input voltage
12 to 24V ac
or 12 to 48V dc
H1
Transmission strike
V
Outputs
Black Input voltage 12V to 24V ac or 12V to 48V dc
Red Power supply of 12V to 24V ac or 12V to 48V dc
Pink Request-to-exit input relay 1
Purple Common
Light blue Timer Contact
Dark blue N/C contact relay 2
Dark green Common relay 2
Light green N/O contact relay 2
Orange N/C contact relay 1
Yellow Common relay 1
Brown N/O contact relay 1
white Output to prevent removal
Grey Output to prevent removal
230V
Locked power
230V
supply
Description