Philips SalonStraight Sonic HP4666 Mode D'emploi page 9

The default temperature setting of 120 appears on the display. As
,
soon as the appliance has heated up to this setting, the word
'READY' appears on the display.
The word 'SONIC' appears on the display (see section 'Sonic
,
vibration').
Never leave the appliance unattended when it is plugged in. Always put
the appliance on a heat-resistant surface when it is heating up and
when it is hot.
3 Select a temperature setting that is suitable for your hair.
- Always select a low setting when you use the straightener for the first
time.
- For coarse, curly or hard-to-straighten hair, select a medium to high
setting (170 and up).
- For fine, medium-textured or softly waved hair, select a medium to
low setting (160 and below).
Take extra care with pale, blonde, bleached or colour-treated hair, since
it is susceptible to damage at high temperatures.
4 To set the temperature setting, press the + button to increase the
temperature setting or press the - button to decrease the
temperature setting. (Fig. 2)
The display shows the selected temperature setting.
,
When the appliance has heated up to the selected setting, the word
,
'READY' appears on the display.
The bars on the display show the remaining usage time of the
,
appliance. The total usage time is 60 minutes. Every ten minutes one
of the six bars disappears. After 60 minutes, the appliance switches
off automatically.
5 Comb or brush your hair so that it is disentangled and
smooth. (Fig. 3)
Use a comb to divide the hair into sections. Do not put too much hair in
one section.
Note: It is better to section off the crown area and to straighten the hair
underneath first, followed by the top area.
EnglisH
9